Directed DB3 403.KIA8 Посібник з монтажу - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з монтажу для Автомобільні аксесуари Directed DB3 403.KIA8. Directed DB3 403.KIA8 20 сторінок. 2020 kia forte5 (smart key)
Друкувати сторінку
Pre-installation and application warnings
This section highlights important information for this specific firmware and will assist in pricing accordingly, as
START
HERE
well as bringing awareness to any operational or vehicle limitations.
Compatibilities and Requirements
T-Harness
T-Harness is not compatible.
compatible
Vehicle Takeover
Firmware notes
Unless specified otherwise, all connectors are displayed from the wire side, with the exception of the OBDII diagnostic connector.
Refer to the "Vehicle connections" following the installation diagram.
Footnotes
[1] Hood pin: The installation of an aftermarket hood pin is only required on vehicles that are not equipped with a factory
hood pin, or if not supported in data.
[2] Tach:
The tach wire is an optional connection required on some remote starters, which do not support a tach signal in D2D.
[3] Resistor: The resistor value can be anywhere between 5K and 10K.
5
403.KIA8 1.07 2020 Kia Forte5 (Smart Key)
©2022 VOXX•DEI LLC. All rights reserved.
Refer to the Quick Reference Guide section for more details.
Keys required for
1
Keys required
programming
for operation
0