Zanussi ZKT 850 D Інструкція з експлуатації - Сторінка 9

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Варильна поверхня Zanussi ZKT 850 D. Zanussi ZKT 850 D 19 сторінок. Glass ceramic induction hob

Друкувати сторінку

Safety switch-off of the cooking

zones

If you forget to switch off a cooking zone, it is auto-

matically switched off after a certain period.

If the safety switch-off function was activated, "

shown in the display if the temperature of the cook-

ing zone does not exceed 60°C.

"H" is shown in the display if the residual heat is

above 60°C (see "Residual heat display").

Locking the appliance or the

cooking zones (child-proofing)

Locking the appliance

The locking key enables you to completely

lock the appliance so that no accidental set-

tings can be made.

1. Press the On/Off button

2. Press the locking key The corresponding indica-

tor lamp is switched on.

Switch off the child-proofing function before you

switch off the appliance. If you do not switch off the

safety lock before switching off the hob, the safety

lock will still be active when you switch on the hob

again.

No other controls can be operated until you switch

off the safty lock.

Locking the cooking zones

If one or more cooking zones are switched

on, you can block them to prevent the set-

tings which have been made accidentally

being adjusted.

If the cooking zone is switched on and if the heating

power has been selected, press the locking key

The locking system is activated: The corresponding

indicator lamp is switched on.

When the controller is locked:

• The settings can not be changed;

• The cooking zones and the controller can only be

switched off with the aid of the On/Off button.

." is

Cooking with the automatic heating-

up function.

All four cooking zones of the hob have nine heat set-

tings and are equipped with an automatic heating-up

function.

– !, lowest heat setting

– ), highest heat setting

– a, automatic warm up function.

With the heating-up function (a), the cooking zone

operates for a certain time at full power and auto-

matically switches back to the heat setting selected.

The duration of the automatic heating-up boost

depends on the selected further cooking stage.

1. Select the required cooking zone with the cook-

ing zone sensor keys. The decimal point in the

associated display field illuminates. Set the cook-

ing stage ) with the + or --sensor fields. Then

press the +-sensor field again. a now lights up

in the cooking stage display.

2. Next, press the sensor field - and set to the

required continued cooking stage „ to (. The

cooking setting chosen is then displayed. After

5 seconds, a appears again in display instead of

the heat setting.

The heat setting is displayed again at the end of the

automatic warm up time.

If you select a higher setting during the

Automatic function, e.g. from § to %, allow-

ance is made for the previous heating-up

time. If you select a lower stage, the Auto-

matic function is ended immediately. If you

start cooking again on a cooking zone that is

still warm, the automatic warm up function

uses the residual heat. This saves time and

energy.

If the pan is removed from the cooking zone

during the heating-up boost, the heating-up

boost is interrupted until a pan is put back

down (if the interruption does not last longer

than 10 minutes).