Zanussi ZHC4284 Посібник користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник користувача для Вентиляційна витяжка Zanussi ZHC4284. Zanussi ZHC4284 44 сторінки. Zanussi chimney hood product brochure
Також для Zanussi ZHC4284: Особливості (5 сторінок)

Друкувати сторінку

If, having followed these instructions carefully, your cooker hood fails to work properly please carry out

the following checks.

Symptom

The cooker hood will not start

The cooker hood is not working effectively

The cooker hood has switched off during opera-

tion

If after all these checks, the fault persists, contact your

local Service Force Centre, quoting the model and

serial number.

Please note that it will be necessary to provide proof of

purchase for any in-guarantee service calls.

SOMETHING NOT WORKING

Solution

• Check the hood is connected to the electricity

supply.

• Make sure the switch is in the 'ON' position.

• The fan speed is set high enough for the task

• The grease filter is clean.

• The kitchen is adequately vented to allow the

entry of fresh air.

•

If set up for recirculation, check that the charcoal

filter is still effective.

• If set up for extraction, check that the ducting and

outlets are not blocked.

• The safety cut-out device has been tripped.

• Tum off the hob and then wait for the device to

reset.

In-guarantee customers should ensure that the

above checks have been made as the engineer will

make a charge if the fault is not a mechanical or

electrical breakdown.