Clarke PPH10ND Інструкція з експлуатації та обслуговування - Сторінка 16
Переглянути онлайн або завантажити pdf Інструкція з експлуатації та обслуговування для Повітряний компресор Clarke PPH10ND. Clarke PPH10ND 17 сторінок. Air compressor
Також для Clarke PPH10ND: Посібник з експлуатації та обслуговування (10 сторінок), Інструкція з експлуатації та обслуговування (20 сторінок)
Друкувати сторінку
Compressor unit runs
Large amount of condensation in
on and off load more
air receiver.
frequently than usual.
Leaks in system
Compressor unit runs
Leaks in system.
'on load' when no air is
being used.
Compressor's oil
Too much oil in compressor.
consumption rising.
Leaks around crank case.
Working temperature of
compressor too high because of
insufficient cooling.
Cylinder worn.
Intake air filter blocked.
Oil in the air delivered.
Sump over full.
Cylinder worn.
Intake air filter blocked.
Oil level rises although
Condensation in oil pump.
no oil has been put in.
Condensation at outlet
Piping installation incorrect.
points.
Compressor taking in air which is
too warm.
Drain off condensation Regularly
(Every day before use).
Locate leaks (by means of soapy
water) and repair.
Locate leaks (by means of
soapy water) and repair.
Check oil level 2 or 3 minutes after
stopping.
Change seal and inspect
packing surfaces. Repair or
replace defective parts.
Increase ventilation to air
compressor.
Replace worn parts or send
compressor pump for an
overhaul.
Reduce oil to correct level.
Replace worn parts or send
compressor pump for an
overhaul.
Change air filter.
Compressor over dimensioned.
Consult your local dealer.
Obtain better fresh-air supply to
compressor.
- 17 -