Directed XpressKit DBALL Посібник з монтажу - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник з монтажу для За замками Directed XpressKit DBALL. Directed XpressKit DBALL 16 сторінок. Ford5 remote start ready (rsr) installation
Також для Directed XpressKit DBALL: Посібник (14 сторінок), Посібник з монтажу (16 сторінок), Посібник (19 сторінок)
Друкувати сторінку
Quick Reference Guide
DBALL/DBALL2-CHRYSLER7 Range Extender Ready (RXT) Installation
Range Extender Ready (RXT)
Range Extender Ready (RXT) is used to amplify the distance covered
by factory remote starters, which are built into the BCM of the vehicle.
The interface connects to the vehicle and uses the same codes as the
factory remote to remote start the vehicle. The runtime and features are
identical to the ones for the OEM remote starter. Some of the
advantages of RXT are greater distance coverage and 2-way
compatibility.
RXT Operations
The following table describes the behavior of the vehicle in relation to the RXT
feature. The following commands are performed on the aftermarket remote.
Command
Engine
Start
NOT running.
Start
Running.
Runtime
Refer to vehicle owner's manual.
Runtime Reset
Refer to vehicle owner's manual.
Result
The engine will be started.
The engine will be stopped.
List of Available Commands
Note that the information below is for Viper, Clifford and Python models. Icons and
commands may differ depending on the remote brand and model purchased. Refer
to your authorized installation center for more information.
Button(s)
Actions
Press & hold for 1 second to lock.
Press & hold for 1 second to unlock.
Press & hold for 1 second to remote
start.
Press & hold for 5 seconds to activate
the trunk release (optional).
Press
x1 +
rear hatch/tail glass release (optional).*
Press
x3 +
the panic mode.
Press
x1 +
remote starter runtime.
* This output is configurable. see your authorized installation center for more
information.
once, then
to activate the
3 times, then
to activate
once, then
to reset the
© 2014 Directed. All rights reserved.