Directed XpressKit DBALL Посібник з монтажу - Сторінка 14
Переглянути онлайн або завантажити pdf Посібник з монтажу для За замками Directed XpressKit DBALL. Directed XpressKit DBALL 16 сторінок. Ford5 remote start ready (rsr) installation
Також для Directed XpressKit DBALL: Посібник (14 сторінок), Посібник з монтажу (16 сторінок), Посібник (19 сторінок)
Друкувати сторінку
Quick Reference Guide
DBALL/DBALL2-CHRYSLER7 Range Extender Ready (RXT) Installation
SmartStart Compatible
This system is compatible with Directed SmartStart 3.0. For
a complete list of supported features, please visit
www.mysmartstart.com.
What is SmartStart?
Now you can remote start, lock and unlock your car just by pushing a button on
your smartphone; using the SmartStart App from Directed, the leader in vehicle
security and remote start. The simple graphical interface gives you control over the
following features of your installed remote start or security with remote start system:
Ÿ Lock/Arm
Ÿ Unlock/Disarm
Ÿ Remote Car Starter
Ÿ Trunk Release
Ÿ Panic
Ÿ Aux Channels
You can also control multiple vehicles – great for families – and assign more than
one user to control a vehicle. It's easy with SmartStart!
But, this is only the beginning! SmartStart is loaded with additional features
including GPS tracking, SmartSchedule, vehicle status, roadside assistance, home
control, parked car finder and more.
3.0 enables a "Cloud-Connected Car" like never before, providing an entirely new
level of 2-way interaction with your vehicle. Connectivity is managed through the
Directed Cloud Services (DCS) network linking car, app, end user, and the Internet.
For more information, visit www.mysmartstart.com.
Engine Idle Protection System (EIPS)
Vehicles equipped with RFID-type Push-to-Start ignition systems work by detecting
a proximity key in the vehicle. They will run indefinitely if the key is removed, which
could potentially lead users to exiting the vehicle while the engine is still running
and the car is left idling on its own in a garage or a confined space.
To mitigate risk, we have designed a feature that is now available on the DBALL. It
will detect the presence of the RFID fob in the vehicle, through the CAN bus. If left
idling for more than the pre-defined runtime (i.e. 1 to 5 minutes) without detecting
the fob, DBALL will send a signal to the vehicle in order to shut off the engine.
EIPS (Engine Idle Protection System) will:
Notify the user about the idling engine by sounding the horn with a series of short
§
beeps.
Shut down the engine after a pre-defined period of time (i.e. 1 to 5 minutes).
§
EIPS is configured using XpressVIP. The following window is displayed whenever
a DBALL module is flashed.
If the engine fails to shut down due to some malfunction, EIPS will go into alarm
§
mode and will notify the user by all means possible (e.g. horn or siren).
© 2014 Directed. All rights reserved.