Blackberry RADAR-M ITA100-1 Посібник з монтажу - Сторінка 36
Переглянути онлайн або завантажити pdf Посібник з монтажу для Радар. Blackberry RADAR-M ITA100-1. Blackberry RADAR-M ITA100-1 39 сторінок. Container, dry van, insulated trailers barn doors
Також для Blackberry RADAR-M ITA100-1: Посібник з монтажу (27 сторінок), Посібник з монтажу (36 сторінок)
Друкувати сторінку
36
BLACKBERRY RADAR ITA100-1 CHASSIS BRACKET INSTALLATION GUIDE
5. Remove the screws from the device.
Tip: For faster screw removal, you may use a T-30 Torx bit on a cordless drill.
6. Remove the internal module from the bracket. Guide the device along the cable and
the connector through the hole on the internal module.
7. Separate the external module from the bracket using the following technique.
IMPORTANT: Do not attempt to separate the device from the bracket using
a heat gun. This can damage the device.
Avoid striking the device with a hammer. Repeated strikes with a tool can
damage the device.
At the bottom corners of the external module, insert a tool between the back of the
external module gasket and the bracket surface. Apply gentle upward pressure on the
tool to separate the module from the bracket. Repeat until external module is separated
from the bracket. When using this approach, please exercise caution to avoid greatly
damaging the sealing gasket.