Aleko Victoria Series Посібник з монтажу - Сторінка 18
Переглянути онлайн або завантажити pdf Посібник з монтажу для Аксесуари Aleko Victoria Series. Aleko Victoria Series 20 сторінок. Sizes 6.5x5 8x6.5 10x8
Також для Aleko Victoria Series: Інструкція з монтажу та експлуатації (12 сторінок), Посібник з монтажу (14 сторінок), Посібник з монтажу (17 сторінок)
Друкувати сторінку
- 1. Parts Diagram
- 2. Assembly Step One: Preparing Your Work Space
- 3. Assembly Step Four: Torsion Bar Assembly
- 4. Assembly Step Eight: Center Support Assembly
- 5. Installation: Notes about Wall Mounting
- 6. Optional Installation: Adjusting the Awning Pitch/Angle
- 7. Optional Installation: Motor Installation
MOTOR INSTALLATION
☻
BEFORE YOU START
Warning: To ensure the longevity of your motor, please do not submerge it in water, hit or drop it, or drill it. Also, double
check that the power cord is not damaged.
STEP ONE: DRIVE ADAPTER INSTALLATION
1. Place the gear onto the motor, as seen in the diagram. This will allow your motor to spin.
2. Secure the gear to the motor with the provided screw.
3. Once the gear is attached to your motor, ensure that it is fully secure.
4. Finally, place the motor into the awning tube.
STEP TWO: PROGRAMMING THE REMOTE
IMPORTANT:
(1-4) within 10 seconds. Failure to do so will result in starting over.
18
While programming your remote, you must complete all the steps