Directed Electronics 3100 Посібник з монтажу - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник з монтажу для Автосигналізація Directed Electronics 3100. Directed Electronics 3100 16 сторінок. Car security
Друкувати сторінку
Function Table
Valet button presses
(Chirps/Flashes)
1
2
3
4
5
6
7
8
*Press any remote button to program the standard button configuration as
described in the owners manual.
** Press any button of a programmed remote to delete all remote controls from
the system and to reset the features to default settings.
System Feature Programming
The system features are pre-programmed to default settings and may need to
be changed to accommodate vehicle specific requirements and user prefer-
ences. To change the system feature settings use the following procedure:
Important: Test the systems Ignition input, Door trigger input, Valet button,
Status LED, and siren for proper operation before proceeding.
1.
Select a System Feature and required number of Valet button presses as
described in the following Features table.
2.
Open a door, turn the key ON, and then OFF.
3.
Press and release the Valet button to select the feature. After pressing
and releasing corresponding to the selected function, then press the Valet
button once more and hold it. The LED flashes and the siren sounds to
confirm the selection.
4.
While still holding the Valet button press the
© 2011 Directed Electronics. All rights reserved.
System Function
Arm/Disarm/Panic
Aux Channel 2
Aux Channel 3
Arm only
Disarm only
Panic only
Auto-learn standard configuration*
Delete remote controls & Reset features**
button on the
9
AUX
AUX