Directed Electronics 3100 설치 매뉴얼 - 페이지 11

{카테고리_이름} Directed Electronics 3100에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Directed Electronics 3100 16 페이지. Car security

Function Table

Valet button presses

(Chirps/Flashes)

*Press any remote button to program the standard button configuration as

described in the owners manual.

** Press any button of a programmed remote to delete all remote controls from

the system and to reset the features to default settings.

The system features are pre-programmed to default settings and may need to

be changed to accommodate vehicle specific requirements and user prefer-

ences. To change the system feature settings use the following procedure:

Important: Test the systems Ignition input, Door trigger input, Valet button,

Status LED, and siren for proper operation before proceeding.

Select a System Feature and required number of Valet button presses as

described in the following Features table.

Open a door, turn the key ON, and then OFF.

Press and release the Valet button to select the feature. After pressing

and releasing corresponding to the selected function, then press the Valet

button once more and hold it. The LED flashes and the siren sounds to

confirm the selection.

While still holding the Valet button press the

System Function

Arm/Disarm/Panic

Aux Channel 2

Aux Channel 3

Arm only

Disarm only

Panic only

Auto-learn standard configuration*

Delete remote controls & Reset features**

button on the

AUX