Clarke 6499642 Інструкції з монтажу та обслуговування - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкції з монтажу та обслуговування для Водяний насос Clarke 6499642. Clarke 6499642 4 сторінки. Strong chemical vane pump
Друкувати сторінку
ASSEMBLY
FITTING THE PUMP TO A BARREL
1. Assemble the pump using the required number of inlet tubes. Use the PTFE tape at all connections
• The tube which contains the black fiter + mesh should be at the bottom.
2. Screw the collar into the threaded opening of the barrel.
3. Raise or lower the inlet tube so that it is just off of the bottom of the barrel when fitted.
USING THE PUMP
1. Make sure all connections are secure and place a suitable container under the spout.
2. Rotate the handle to draw fluid from the barrel.
• The first time you use the pump, liquid should begin flowing after several turns of the handle
MAINTENANCE
CLEANING THE INLET FILTER
1. Unscrew the inlet filter from the bottom of the inlet tube and clear away any debris it has trapped.
2. Replace the filter.
CAUTION: DO NOT USE THE PUMP WITHOUT THE FILTER IN PLACE.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
WHAT IS SUPPLIED
ASSEMBLED