Clarke CEB103 Інструкція з експлуатації та технічного обслуговування - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з експлуатації та технічного обслуговування для Водяний насос Clarke CEB103. Clarke CEB103 13 сторінок. Water pump
Друкувати сторінку
1. The suction hose and connections including the filler plug need to be
completely air tight, otherwise air will be drawn in and either reduce or
completely stop the flow of water.
2. Ensure that the system has been fully primed with water up to the level of
the filler plug.
3. Check to see that no foreign matter is fouling the intake system and check
the filter is not blocked or obstructed.
4. Check that the vertical height between the level of the water intake and
the ultimate discharge point does not exceed 35 metres. If this should be
the case then the height must be reduced.
Should you still experience problems, then contact your Clarke dealer, or
CLARKE International Service Department for advice.
ACCESSORIES
1" Foot Valve Filter
1" BSP Spigot Hose Connector
1" I.D. Reinforced Hose for suction and delivery.
1" I.D. Layflat Hose for delivery only.
SPECIFICATIONS
Motor
Max. Head
Max. Suction Lift
IP Rating
Max. Temperature or liquid being pumped
Bore Size
Max. Output
Guaranteed Sound Power Level LWA
Duty Cycle
Weight
Please note that the details and specifications contained herein, are correct at the time
of going to print. However, CLARKE International reserve the right to change
specifications at any time without prior notice. Always consult the pump's data plate
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
370W, 230V 50Hz 1ph
35 m
8 m
IPx4
o
40
C
1"BSP
35 litres/min
77 dB
S1 - Continuous
5.4 kg
7
7950561
7950210
7955010
7955110