Clarke DWP300A Інструкція з експлуатації та технічного обслуговування - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з експлуатації та технічного обслуговування для Водяний насос Clarke DWP300A. Clarke DWP300A 13 сторінок. Submersible pump
Друкувати сторінку
INSTALLING THE PUMP
Remove all packaging and make sure that the pump has no visible damage.
Dispose of all packaging appropriately.
FITTING THE ELBOW
1. Screw one of the elbows into the
outlet port as shown. Two elbows
are supplied;
• Threaded elbow
• Push-fit elbow
FITTING THE STEPPED ADAPTER
The stepped hose adaptor supplied is
designed to be used for either screw
type hose connection or push fit.
• stepped adapter for 1½" BSP /1"BSP hose (hose not supplied)
1. Screw the adaptor to the
threaded elbow and connect a
suitable hose (not supplied) to
either the screwed end or push-fit
• Suitable hoses are available
from your local Clarke dealer.
• The adaptor can be cut off
with a hacksaw to provide
clearance if required, when a
larger hose is to be used.
2. Trim the adaptor to size if required.
• Reducing the hose diameter will affect the maximum flow rate.
3. When push fitting the hose to the adaptor or elbow, use a jubilee clip to
secure it. Do not overtighten.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
6