Clarke DWP300A 운영 및 유지보수 지침 매뉴얼 - 페이지 6

{카테고리_이름} Clarke DWP300A에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke DWP300A 13 페이지. Submersible pump

INSTALLING THE PUMP

Remove all packaging and make sure that the pump has no visible damage.

Dispose of all packaging appropriately.

FITTING THE ELBOW

1. Screw one of the elbows into the

outlet port as shown. Two elbows

are supplied;

• Threaded elbow

• Push-fit elbow

FITTING THE STEPPED ADAPTER

The stepped hose adaptor supplied is

designed to be used for either screw

type hose connection or push fit.

• stepped adapter for 1½" BSP /1"BSP hose (hose not supplied)

1. Screw the adaptor to the

threaded elbow and connect a

suitable hose (not supplied) to

either the screwed end or push-fit

• Suitable hoses are available

from your local Clarke dealer.

• The adaptor can be cut off

with a hacksaw to provide

clearance if required, when a

larger hose is to be used.

2. Trim the adaptor to size if required.

• Reducing the hose diameter will affect the maximum flow rate.

3. When push fitting the hose to the adaptor or elbow, use a jubilee clip to

secure it. Do not overtighten.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]