Dirt Devil DDCW600 Посібник користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник користувача для Пилосос Dirt Devil DDCW600. Dirt Devil DDCW600 12 сторінок.
Друкувати сторінку---
Operation
How to operate your cleaner
1
Fill the measuring cap 3 times with
with carpet cleaning solution
and pour into the reservoir.
Note: The cleaning solution supplied
with your machine is VAX AAA Carpet
Cleaner.
When replenishing this item, please
use VAX Carpet Cleaner which is
available in 1 litre bottles from your
VAX stockist or any VAX branch office.
How to operate your cleaner
1
Plug the cord into a mains electricity
socket. Turn the power and brushroll
switch on.
The switch is located on the front of
the cleaner, above the solution
reservoir.
The power switch controls the
vacuum motor and the brush roll
when switched on.
dirtdevil.com.au
2
Fill the remaining space in the
solution reservoir with tap water.
Replace the measuring cap.
Note: use only VAX AAA cleaning
solution or VAX Carpet Cleaner. Using
other cleaning solutions may result in
excessive foaming. This may cause
the float to shut off the cleaner
prematurely.
Using other cleaners will void your
warranty.
Important: Never leave the cleaner unattended with the power on.
Vacuum carpets thoroughly with dry vacuum cleaner before washing.
2
Press on the handle release pedal
and pull the cleaner back into a
reclined position.
3
Place the bottom of the solution
reservoir into the cleaner and push
into place. There will be an audible
click when the reservoir is in the
correct position.
3
While pressing the solution release
trigger, pull the cleaner in a backward
motion. Release the trigger and push
forward over the same path to
remove the dirty water and solution
from the carpet. Repeat if necessary.
For best results use a smooth steady
action - keeping the nozzle flat
against the carpet. When the dirty
water reaches the max fill line on
the dirty water tank, empty the tank.
5