Armstrong Air BCS2 Series Інструкція з монтажу Посібник з монтажу - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Кондиціонери Armstrong Air BCS2 Series. Armstrong Air BCS2 Series 15 сторінок.
Друкувати сторінку
Before Conversion
1.
Remove and set aside blower and coil access covers.
2.
Remove the coil support bracket.
3.
Remove coil assembly, bottom drain pan and side drain
pan as one assembly from the air handler.
Caution: equipment damage, or personal injury. Take
care when removing coil assembly from unit. Installation in
this configuration may cause the coil to tip into unit once
clear of the cabinet. Support the coil when removing.
4.
Move side drain pan to the opposite side
5.
Install modified coil assembly back into air handler in the
same orientation as before.
6.
Install the coil support bracket on the opposite side of
the air handler.
5
For models 2.5 thru 5 ton the bracket attached to
NOTE:
the top plate will need to be switched to the opposite side
of the coil. This is to prevent blowoff in the horizontal
position when the airflow is changed from left hand to right
hand.
7.
Determine knockouts required for drain line
connections. Knock out and install drain lines.
8.
Replace the blower and coil access covers.