BLADEZ ION 150 Процедури усунення несправностей - Сторінка 3

Переглянути онлайн або завантажити pdf Процедури усунення несправностей для Скутер BLADEZ ION 150. BLADEZ ION 150 12 сторінок. Electric power board
Також для BLADEZ ION 150: Посібник по продукту (13 сторінок)

BLADEZ ION 150 Процедури усунення несправностей
Unit run a short range
Front steering feel loose or bolt
and nuts fall off
Faulty Control Board
Faulty Battery
Tight Belt - If the belt is adjusted too tight, it
will create a high resistance on the wheel and it
drains out the battery sooner
Tire pressure is low or tire inner tube is puncture
Handlebar installed incorrectly
Replace Control Board
Individual battery reading should be around
12.6 or above after fully charged. Replace the
entire set of battery if voltage is below 10.5V.
The polarity difference between the two
batteries should not be more than 0.3V
Loose up the belt, see check belt tightness
illustration for troubleshooting
Add air to the tire or replace tire if puncture,
refer to the owner's manual for replacing tire
Please make sure that the bolts and nuts are
placed correctly as shown