Cub Cadet Commercial Hydraulic Renovator Посібник оператора - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник оператора для Газонна та садова техніка Cub Cadet Commercial Hydraulic Renovator. Cub Cadet Commercial Hydraulic Renovator 12 сторінок. Kawasaki, 8hp engine
Друкувати сторінкуSAFETY PRECAUTIONS
A. General:
1.
Read this Operator's Manual before starting the
Renovator. Study the controls and learn the proper
sequence of operation.
2.
Do not allow anyone to operate or maintain this machine
who has not read the manual. Never permit children to
operate this machine.
3.
Always have your feet and hands clear of the power
deck when starting the engine.
4.
Do not remove the seeder safety switch. If this switch is
damaged or does not function, repair or replace it before
operating the Renovator.
5.
Do not remove any shields, guards, decals or safety
devices. If a shield, guard, decal or safety device is
damaged or does not function, repair or replace it before
operating the Renovator.
6.
Always wear safety glasses, long pants and safety
shoes when operating or maintaining this machine. Do
not wear loose-fitting clothing.
7.
Never run the engine indoors without adequate
ventilation. Exhaust fumes are deadly.
8.
To avoid serious burns, do not touch the engine, muffler
or hydraulic components while the engine is running or
until everything has cooled after the engine has been
shut off.
B. Related to Fuel:
1.
Gasoline is highly flammable. Respect it.
2.
Do not smoke or permit others to smoke while handling
gasoline.
3.
Always use approved containers for gasoline.
4.
Always shut off the engine and permit it to cool before
removing the cap of the fuel tank.
5.
Always fill the fuel tank outdoors.
6.
If the fuel container spout will not fit inside the fuel tank
opening, use a funnel.
7.
When filling the fuel tank, stop when the gasoline
reaches one inch from the top. This space must be left
for expansion. Do not overfill.
8.
Wipe up any spilled gasoline.
SPECIFICATIONS
Engine:....................................................Kawasaki, 8 HP, recoil start.
Traction Drive: ........................................Hydraulic with a chain-and-sprocket driven rear axle differential.
Slicer Reel Drive: ....................................Double V-belt with a spring-loaded safety clutch.
Slicer Blades: ..........................................40 hardened, high-carbon steel, reversible, replaceable.
Seed Metering System: ..........................Hydraulic activated overlapping, diamond and round-shaped holes.
Seed Agitator: .........................................Ground-driven, rotor bar.
Seed Hopper:..........................................1-1/2 cubic feet, approximately 35-lb. capacity.
Seed Types:............................................Ryegrass, bluegrass, bermudagrass, fescue and bentgrass.
Wheels and Tires: ...................................Steel wheels with 13.5 x 6 pneumatic tires.
Seeding/Dethatching Width: ...................20 inches.
Overall Width: .........................................30-3/4 inches.
Weight:....................................................290 lbs.
C. When Operating:
1.
Keep adults, children and pets away from the area to be
renovated.
2.
Always remove debris and other objects from the area
to be renovated.
3.
Watch out for rocks, small tree stumps, sprinkler heads,
water shutoff plates, etc.
4.
When starting the engine, always have the hydraulic
traction control lever in neutral and never have the slicer
safety clutch engaged.
5.
Operate the machine in a straight line to avoid damage
to the slicer blades.
6.
Always have proper footing on slopes and hillsides and
never operate when conditions are slippery.
7.
Always keep both hands on the handle.
8.
Be careful when crossing roadways. Always release the
slicer safety clutch and place the machine in the
transport position.
9.
When leaving the Renovator unattended, shift the
hydraulic traction control lever into neutral, shut off the
engine, shut the fuel shutoff valve and disconnect the
spark plug wire.
10. Always park the Renovator and start the engine on a
level surface with the hydraulic traction control lever in
neutral.
11. If you hit a solid object while slicing, release the slicer
safety clutch, shift the hydraulic traction control lever
into neutral and shut off the engine. Disconnect the
spark plug wire and inspect the slicer reel for damage.
Repair any damage and make sure the blades are in
good condition and the blade bolts are tight before
restarting the engine.
12. Always disconnect the spark plug wire to prevent the
engine from accidentally starting before performing any
maintenance on this machine.
13. Keep the Renovator and especially the engine, pump
and belt area clean and free of grease, grass and leaves
to reduce the chance of fire and to permit proper
cooling.
3