3D Hobby Shop 49 Sukhoi 26MX Посібник з монтажу - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник з монтажу для Іграшка 3D Hobby Shop 49 Sukhoi 26MX. 3D Hobby Shop 49 Sukhoi 26MX 18 сторінок.

Assemble the rudder servo arm as shown. The connector nuts should be loose enough to allow the

connectors to rotate freely on the horn, use medium CA glue to lock the nuts into place permanently.

NOTE: 3DHobbyShop brand long servo arms are pictured.

The rudder pull-pull cable system is assembled as shown. Use medium CA to lock all nuts onto their

bolts, or they WILL come loose in flight.

Assemble the rudder ends of the cables as shown. Make the loop in the cable as shown before crimping.

Crimp the brass tube sleeve with pliers to secure the assembly. Crimp HARD to keep the cable from

sliding, then add a drop of thin CA to the crimp-joint. Use a drop of thin CA where the ball-link screws

onto the chrome end piece.