3D Hobby Shop 49 Sukhoi 26MX Посібник з монтажу - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник з монтажу для Іграшка 3D Hobby Shop 49 Sukhoi 26MX. 3D Hobby Shop 49 Sukhoi 26MX 18 сторінок.

Apply medium or thick CA glue into the slot in the left side elevator as shown. Install elevator half,

holding perfectly straight (you can also use tape on this side as well) while glue dries. Apply 2 drops of

Remove covering over elevator horn slot and install elevator horn as shown, using plenty of medium or

Remove covering over elevator servo opening. Attach 18-20" servo extension to elevator servo and

install as shown, with output shaft toward rear of airplane.

thin CA to each hinge.

thick CA on the horn.