3D Hobby Shop 49 Sukhoi 26MX Руководство по сборке - Страница 10

Просмотреть онлайн или скачать pdf Руководство по сборке для Игрушка 3D Hobby Shop 49 Sukhoi 26MX. 3D Hobby Shop 49 Sukhoi 26MX 18 страниц.

Apply medium or thick CA glue into the slot in the left side elevator as shown. Install elevator half,

holding perfectly straight (you can also use tape on this side as well) while glue dries. Apply 2 drops of

Remove covering over elevator horn slot and install elevator horn as shown, using plenty of medium or

Remove covering over elevator servo opening. Attach 18-20" servo extension to elevator servo and

install as shown, with output shaft toward rear of airplane.

thin CA to each hinge.

thick CA on the horn.