3D Hobby Shop 49 Sukhoi 26MX 조립 설명서 - 페이지 10
{카테고리_이름} 3D Hobby Shop 49 Sukhoi 26MX에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D Hobby Shop 49 Sukhoi 26MX 18 페이지.
페이지 인쇄Apply medium or thick CA glue into the slot in the left side elevator as shown. Install elevator half,
holding perfectly straight (you can also use tape on this side as well) while glue dries. Apply 2 drops of
Remove covering over elevator horn slot and install elevator horn as shown, using plenty of medium or
Remove covering over elevator servo opening. Attach 18-20" servo extension to elevator servo and
install as shown, with output shaft toward rear of airplane.
thin CA to each hinge.
thick CA on the horn.
10