3D Systems CUBE Посібник користувача - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник користувача для 3D-принтери 3D Systems CUBE. 3D Systems CUBE 20 сторінок. Replacing the print tip
Також для 3D Systems CUBE: Документація (8 сторінок), Урок (15 сторінок)

Друкувати сторінку

When prompted, loosen the lock screw that is indicated on the touchscreen display.

Select the

checkmark

NOTE: Use a 1.5 mm Allen wrench that is included with the printer.

NOTE: The lock screw (1) is located just below the adjustment knob (2). The

lock screw for adjustment knob B can be accessed from the front of the

printer. The lock screw for adjustment knob A can be accessed from behind

the printer.

Follow the instructions on the touchscreen display. Once the adjustments have been

made, select the

to continue.

checkmark

to continue.