displayit Graffiti Plus Інструкція з монтажу Посібник з монтажу - Сторінка 10
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Монітор displayit Graffiti Plus. displayit Graffiti Plus 13 сторінок. 10x20 inline display kit a
Також для displayit Graffiti Plus: Інструкція з монтажу (4 сторінок)
Друкувати сторінку
NOTE: Ensure part
labels match
3. Extend the bungeed poles and attach them
to the base.
5. Install the angled top
after the shelves are
installed.
displayit.com
StoreFront Product Stand
Shelf Rack Assembly
1. Begin building the center of the
base by installing the corner pieces on
each end of the center base pole.
Assembly is the same for any size
StoreFront Shelf Rack.
800.207.0311
After-Hours Emergency: Call or Text 678.723.5343
10x20 Inline Display Kit A
2. Complete the base assembly by adding
the two poles with curved ends.
Shelf Bracket
Keyholes
4. Attach the shelf brackets
to the keyholes in the
vertical poles.
DISASSEMBLY: Take the display apart in reverse
assembly order. If it is di cult to disassemble the
base, place feet as shown and remove tube 1 by
pulling up at both corners. Pull with even pressure.
Flip the part and repeat to remove tube 3.
Assembly Instructions
Shelf
Magnets
5. Set the shelves on top of
the brackets so the magnets
snap onto the brackets.
3
2
1
90º
Updated 3/15/2019
10