displayit Graffiti Plus 조립 지침 매뉴얼 - 페이지 10

{카테고리_이름} displayit Graffiti Plus에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. displayit Graffiti Plus 13 페이지. 10x20 inline display kit a
displayit Graffiti Plus에 대해서도 마찬가지입니다: 조립 지침 (4 페이지)

페이지 인쇄

NOTE: Ensure part

labels match

3. Extend the bungeed poles and attach them

to the base.

5. Install the angled top

after the shelves are

installed.

displayit.com

StoreFront Product Stand

Shelf Rack Assembly

1. Begin building the center of the

base by installing the corner pieces on

each end of the center base pole.

Assembly is the same for any size

StoreFront Shelf Rack.

800.207.0311

After-Hours Emergency: Call or Text 678.723.5343

10x20 Inline Display Kit A

2. Complete the base assembly by adding

the two poles with curved ends.

Shelf Bracket

Keyholes

4. Attach the shelf brackets

to the keyholes in the

vertical poles.

DISASSEMBLY: Take the display apart in reverse

assembly order. If it is di cult to disassemble the

base, place feet as shown and remove tube 1 by

pulling up at both corners. Pull with even pressure.

Flip the part and repeat to remove tube 3.

Assembly Instructions

Shelf

Magnets

5. Set the shelves on top of

the brackets so the magnets

snap onto the brackets.

90º

Updated 3/15/2019