3D Upfitters LulzBot Mini 2 R1 Посібник з монтажу - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник з монтажу для 3D-принтери 3D Upfitters LulzBot Mini 2 R1. 3D Upfitters LulzBot Mini 2 R1 18 сторінок. Enclosure kit

Друкувати сторінку

Next, attach mid-corner connectors to the left

and right sides of top.

Once the top is on you won't be able to

access the nut for the right-side mid-corner

connector by hand. Instead, use a dab of

super glue (not included) to attach the M4 nut

to the inside of the connector before going

any further.

Once the glue has dried, move the spool holder into the up position, and move the top

of the enclosure in place, putting the notch around the spool holder.