aerl EarthGuard EG-300 Посібник з монтажу та експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Вимірювальні прилади aerl EarthGuard EG-300. aerl EarthGuard EG-300 15 сторінок. Earth leakage detection
Introduction
Thanks for supporting local manufacturing with your purchase of an Australian designed and made
product.
Product Description
Utilizing proprietary detection techniques, the AERL EarthGuard Insulation Monitoring Device
simultaneously monitors the unearthed PV Array (60 - 300V) and Battery Storage System (48/120V) for
conductor insulation degradation.
Installed on the battery bus, the EarthGuard monitoring device satisfies the earth fault detection
requirements of both AS/NZS 5033:2014 & AS/NZS 5139:2019 with onboard audio/visual alarms and an
alarm relay output for external fault indication.
Featuring support for full integration with AERL's CoolMax SRX charge controller range, EarthGuard can be
utilized in an integrated arrangement or as a standalone device for use with approved third-party
controllers, power conversion equipment and battery systems.
Firmware
This installation and operation manual covers EarthGuard Firmware Revision v1.1.
Supported System Components
All AERL products have been tested for compatibility with the EarthGuard EG-300 but some third-party
products may internally exceed the maximum allowed leakage tolerated by the EarthGuard, causing the
device to immediately trigger.
Please refer to the list below for supported third-party Controllers, PCE and Battery Inverters.
Selectronic SP Pro Series 1, 2 & 2i
-
Victron SmartSolar MPPT Series
-
Victron BlueSolar MPPT Series
-
-
Victron MultiPlus
Victron MultiPlus II & II GX
-
-
Victron Quattro Series
Products listed below are incompatible with EarthGuard and cannot be installed in systems requiring
compliance with AS/NZS 5033:2014 & AS/NZS 5139:2019.
-
Victron EasySolar II GX
AER013 REV 1.1
USER MANUAL
EarthGuard – EG-300
Australian Energy Research Labs
AER013 – Rev 1.1
21st July 2020
7