3Doodler Create+ Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари 3Doodler Create+. 3Doodler Create+ 16 сторінок.
Також для 3Doodler Create+: Посібник користувача (11 сторінок)
Друкувати сторінку
Now that you've Doodled with ABS Plastic, we want
to show you everything you need to know about
changing Plastic and introduce you to the different
n
types of Plastic.
odle
Step 6: Reverse and Remove
Plastic
p off the
for 1.5 in.
With Pen set to ABS / FLX, wait
for BLUE Light to come on.
th the Pen
Once Plastic stops reversing,
op of your
it is safe to remove it from the
Pen by gently pulling on the
back of the strand.
s
of
NOTE:
our
ion,
Plastic that is shorter than 5.3 inches cannot be reversed.
You should feed it all the way through your 3Doodler Create+ and
use it up. (Alternatively, you can push Plastic out the back - see
Section 3, Step 3B.)
manual:
manual:
piration
3Doodler_Bob_User_Manual_MAIN_Inner_20180511.indd 6
1
BLUE Light
3
SNIP THOSE ENDS!
TIP
After removing a Plastic strand
from the 3Doodler Create+,
cut and remove any partially
melted material at the end of
your strand before re-feeding
it into the 3Doodler Create+.
This will reduce blockages and
clogging issues.
PLASTIC TYPES AND SETTINGS.
TIP
Before we continue, it's time you learned about the different
types of Plastic you can use with the 3Doodler Create+
(and which settings to use for each type).
ABS (MATTE):
Temp: ABS / FLX Temp
Light: BLUE
Feature: Great for drawing in the air.
How to tell: Plastic has white
semi-circle ends.
PLA (GLOSSY / CLEAR /
METALLIC / SPARKLE ):
Temp: PLA Temp
Light: GREEN
Feature: Gossy and making it perfect
for artistic creations.
How to tell: Very rigid, no white
semi-circle ends.
FLEXY:
Temp: ABS / FLX Temp
Light: BLUE
Feature: Make flexible,
bendable Doodles.
How to tell: Plastic is very flexible.
2
Double click either Speed
Button. Light will start flashing
to signal Plastic reversing.
5.3
inches
6
Flashing
BLUE
x2
11/5/2018 11:37 AM