3Doodler Create+ Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари 3Doodler Create+. 3Doodler Create+ 16 сторінок.
Також для 3Doodler Create+: Посібник користувача (11 сторінок)

3Doodler Create+ Посібник користувача
Step 7: Let's Switch to PLA Plastic!
1
With Pen on ABS / FLX, load a
new strand of PLA Plastic into
Plastic Loading Port. Use a
different color to the ABS you
were using before.
3
Switch Pen to PLA setting. Wait
for Light to turn GREEN.

Step 8: Power Down

Remove all Plastic from the
Pen using the Reverse feature
(double click any Speed
Button). Friendly reminder to
snip those ends!
Allow your 3Doodler Create+
to cool completely
before storing.
NOTE:
After 5 minutes of inactivity, the 3Doodler Create+'s heating
system will automatically power down. You will need to press one
of the Speed Buttons OR toggle the Control Switch OFF and then
ON again to continue use.

TAKE A BREAK:

We recommend powering down and giving your 3Doodler
Create+ a 30 minutes break after every 2 hours of
continuous use.
3Doodler_Bob_User_Manual_MAIN_Inner_20180511.indd 7
BLUE
light
PLA
Plastic
Light to RED
Light to GREEN
1
x2
3
Power Adapter
2
x1
The color of the Plastic will
change once the PLA starts
extruding. It will appear mixed
at first. STOP extrusion by
pushing either button once.
4
x1
Click FAST or SLOW once to
continue extruding the PLA
Plastic and Doodle as you wish.
2
Move the Control Switch
to OFF.
7
SECT
Tools
Before s
with yo
you to t
PLA Plastic
ABS Plastic
SLOW
FAST
With th
at the d
3Doodle
to Dood
11/5/2018 11:37 AM
Mini Sc
Keep this
for remov
Maintena
Keep this
for remov
Maintena
or rotating
Temperat
(See the3d
temperatu