3DP Workbench Посібник - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник для 3D-принтери 3DP Workbench. 3DP Workbench 12 сторінок. Moving and folding the gantry
Друкувати сторінку
3DP Moving and Folding the Gantry
Approved By:
Date: <6/14/2016>
Page 9 of 11
Push the rod until the third hole is accessible from both ends of the printer. Insert the
clevis pins to hold the rod in place.
Push the handles on each end and position between the two (2) holes and secure with
clevis pins.
WI XXXX-xxxxxx– 3DP Moving the Printer