3DP Workbench Manuel - Sayfa 10
3D Yazıcılar 3DP Workbench için çevrimiçi göz atın veya pdf Manuel indirin. 3DP Workbench 12 sayfaları. Moving and folding the gantry
Sayfayı Yazdır
3DP Moving and Folding the Gantry
Approved By:
Date: <6/14/2016>
Page 9 of 11
Push the rod until the third hole is accessible from both ends of the printer. Insert the
clevis pins to hold the rod in place.
Push the handles on each end and position between the two (2) holes and secure with
clevis pins.
WI XXXX-xxxxxx– 3DP Moving the Printer