3DP Workbench Manuel - Sayfa 8

3D Yazıcılar 3DP Workbench için çevrimiçi göz atın veya pdf Manuel indirin. 3DP Workbench 12 sayfaları. Moving and folding the gantry

3DP Moving and Folding the Gantry

Approved By:

Date: <6/14/2016>

Page 7 of 11

Step 6: Remove the filament guide rod.

Disconnect the filament sensor wire and the Heated bed light.

Loosen the filament guide rod holder so you can slide the rod out from the base unit.

Gently remove the rod from the holder leaving the clamp system attached to the cabinet

handle. Set rod aside for later replacement.

WI XXXX-xxxxxx– 3DP Moving the Printer