esera automation ECO 10 Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Контролер esera automation ECO 10. esera automation ECO 10 13 сторінок. 1-wire controller

esera automation ECO 10 Посібник користувача
1
Product description
Sensors and Aktuators
The ECO 10 1-Wire Controller supports up to 30 sensors, actuators, iButton keys or memory devices (hereinafter
referred to collectively as Devices). Up to 5 data values can be output per 1-Wire Device. This means that the
ECO 10 can provide up to 150 data values, which is a very large number and a very good price per data value
ratio.
Data interface
The ECO 10 1-Wire Controller has an ASCII data interface.
You can communicate with your smart home or industrial control, e.g. PLC, supervisory control and data
acquisition systems (SCADA) ASCII TCP protocol with the ECO 10 Controller.
In this way, the ESERA ECO 10 equipments provide an optimal interface between modern digital
1-Wire Devices and your monitoring system.
Autonomous management
The ECO 10 is intended for the autonomous management of a 1-Wire Network. You no longer need to worry
about 1-Wire commands or formulas for evaluating the 1-Wire Devices. The ECO 10 independently scans
the 1-Wire Network for new 1-Wire Devices, reads their Auto-E-Connect data, automatically adapts* the
device libraries and outputs the adapted data in plain text, adapted to the scanned 1-Wire Devices.
Designed for all 1-Wire Networks
The 1-Wire interface of the ECO 10 is specially designed to safely operate small to very large 1-Wire
Networks with long cable distances.
1-Wire Devices can be operated simultaneously in parasitic or normal mode.
The currently strongest 1-Wire interface has been developed for maximum data security even for complex
network structures.
Formatted Data output
The ECO 10 outputs the 1-Wire Device data ready prepared, e.g. for Temperature sensors in C° cyclically.
It is only necessary to divide by 100.
In addition, the article number for ESERA-Modules can be entered, the calculation and output is adapted to
the function of the module.
System time / real-time clock
You do not have a real-time clock with battery buffering in your system? No problem, the ECO 10 will gladly
provide the time with date. The real-time clock (RTC) is supplied by a maintenance-free gold cap (super
capacitor) for approx. 2 days if the supply voltage fails.
What is a goldcap (super capacitor)? You can find an explanation here:
https://de.wikipedia.org/wiki/Superkondensator
Power supply
For power supply, the ECO 10 has a wide range input of 9 - 30VDC and is therefore equally well suited for
industry-typical 12V and 24V system supplies.
Suitable DIN rail or plug-in power supply units can be found in our webshop.
Commissioning
Support Videos for commissioning and configuration can be found on our Website
„Service and Support", Support Videos.
Note
Basics and tips on the 1-Wire Bus system can be found in the ESERA Online Shop under
1-Wire Basics or please refer to our eBook in the shop under Training/Documentation.
* if the sensor or actuator supports Auto-E-Connect. For details, please refer to the operating instructions of the sensor or actuator.
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH 2021
www.esera.de
11601-24 V1.0 R1.1 Manual
www.esera.de
under
Page 2 of 13