esera automation ECO 10 Посібник користувача
Переглянути онлайн або завантажити pdf Посібник користувача для Контролер esera automation ECO 10. esera automation ECO 10 13 сторінок. 1-wire controller
Друкувати сторінку
Art. No. 11601-24
The ECO 10 1-Wire Controller represents a high-
performance 3rd generation 1-Wire Interface for
sensors and actuators
Fully automatic integration of sensors* and
actuators*
Auto-E-Connect Support Level I and II
1-Wire Controller for autonomous communication
and updating of the 1-Wire Network.
Fast readout of all 1-Wire Components in a
1-2 seconds cycle
Cyclic output of the processed 1-Wire data in plain
text
Data communication via socket server/client, TCP
or UDP
Designed for small to large 1-Wire Networks
Power supply of the 1-Wire Network
Top-hat rail housing for control cabinet installation
Wide supply voltage range
Management of all ESERA and many standard
1-Wire Modules and Chips
Note
Before you start assembling the ECO 10 and put the unit into operation, read this operating manual
thoroughly, especially the section on safety instructions.
All settings and configurations of the ECO 10 are carried out with the Config Tool 3 software.
You can find this software on the ESERA website. Please refer to the operating instructions for Config
Tool 3, which you will find under the "HELP/SUPPORT" tab within the Config Tool 3 software.
* if the sensor or actuator supports Auto-E-Connect. For details, please refer to the operating instructions of the sensor or actuator.
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH 2021
www.esera.de
User Guide
ECO 10 1-Wire Controller
Professional 1-Wire Controller
of the 3rd Generation
11601-24 V1.0 R1.1 Manual
Page 1 of 13