esera automation ECO 10 Manual del usuario

Navegue en línea o descargue pdf Manual del usuario para Controlador esera automation ECO 10. esera automation ECO 10 13 páginas. 1-wire controller

Art. No. 11601-24

 The ECO 10 1-Wire Controller represents a high-

performance 3rd generation 1-Wire Interface for

sensors and actuators

 Fully automatic integration of sensors* and

actuators*

 Auto-E-Connect Support Level I and II

 1-Wire Controller for autonomous communication

and updating of the 1-Wire Network.

 Fast readout of all 1-Wire Components in a

1-2 seconds cycle

 Cyclic output of the processed 1-Wire data in plain

text

 Data communication via socket server/client, TCP

or UDP

 Designed for small to large 1-Wire Networks

 Power supply of the 1-Wire Network

 Top-hat rail housing for control cabinet installation

 Wide supply voltage range

 Management of all ESERA and many standard

1-Wire Modules and Chips

Note

Before you start assembling the ECO 10 and put the unit into operation, read this operating manual

thoroughly, especially the section on safety instructions.

All settings and configurations of the ECO 10 are carried out with the Config Tool 3 software.

You can find this software on the ESERA website. Please refer to the operating instructions for Config

Tool 3, which you will find under the "HELP/SUPPORT" tab within the Config Tool 3 software.

* if the sensor or actuator supports Auto-E-Connect. For details, please refer to the operating instructions of the sensor or actuator.

ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH 2021

www.esera.de

User Guide

ECO 10 1-Wire Controller

Professional 1-Wire Controller

of the 3rd Generation

11601-24 V1.0 R1.1 Manual

Page 1 of 13