esera automation ECO 208 PRO Посібник користувача - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник користувача для Контролер esera automation ECO 208 PRO. esera automation ECO 208 PRO 18 сторінок. Professional 1-wire controller
Друкувати сторінку
14
Interface configuration Modbus/TCP, Maxi Interface
Important, at present the configuration of the Ethernet interfaces is only possible via the web interface. The IP
address for starting the web server is shown on the unit display or can be found in the system overview of the
router / DHCP server.
14.1
Maxi Interface, Web server
The ECO controllers with Maxi interface, e.g. ECO 208, have a web server for configuring the Ethernet interfaces
(LAN and WLAN).
The ECO Controller with Maxi interface logs into your network with the identifier "ESERA". The Ethernet interface
is set to "DHCP" in the delivery state.
14.2
Web server, LogIn
* if the sensor or actuator supports Auto-E-Connect. For details, please refer to the operating instructions of the sensor or actuator.
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH 2021
www.esera.de
Password, LogIn
In order to be able to log into the web server of the
ECO Controller, use the following password for the
initial login:
For security reasons, the password is not displayed in
plain text but with dots.
Important: Please change the password after the
first login, otherwise unauthorised persons can
make settings on the ECO Controller.
Please enter a new and secure password via the
main menu, button "Change Password".
You can find information on assigning secure
passwords on the Internet.
After entering the password, click on the "Login" button
to open the main menu (hereinafter referred to as
Main Menu).
Software status Ethernet interface / LogOut
Display of the software version of the Ethernet
interface installed on the unit. You can see the version
of the 1-Wire Firmware via Config Tool 3.
Click on the "LogOut" button to exit the web interface.
11603-48 V1.0 R1.1 Manual
eserapwd
Page 10 of 18