ESI ESRTP4 Інструкція з монтажу Посібник з монтажу - Сторінка 11
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Терморегулятор ESI ESRTP4. ESI ESRTP4 16 сторінок. Programmable room
thermostat
Також для ESI ESRTP4: Інструкція користувача (20 сторінок)
Друкувати сторінку
Setting Sensitivity/Swing and Calibration
3.2
1. Switch the slider to OFF. Press and keep holding the A
and H buttons together (under the fascia), now press
the Next
be displayed. Release all buttons.
2. Press the Next
settings (5U1n9 is displayed at the bottom of the LCD
next to a flashing 0.5). Press +/– to choose between 0.5
to 2.0
3. Press the Next
Press +/– to choose between -3 to 3 (this calibrates the
temperature).
Setting the Landlord Service & Time Events
3.3
1. Switch the slider to OFF. Press and keep holding the A
and H buttons together (under the fascia), now press
the Next
be displayed. Release all buttons.
2. Press the Next
interval) Settings. A numeric password will be required
to enter this section. The factory default password is
0000.
N.B. The screen will display Err if the incorrect password is
entered.
3. Press +/– to enter the first digit of the password. Press
the H button to move to the next digit. Repeat this until
all 4 digits have been entered.
4. Press the Next
settings.
5. Use the +/– buttons to choose between:-
button and the technical settings menu will
button until you get to the SWING
button to enter the ADJ settings.
button and the technical settings menu will
button until you get to SER (service
button to enter the service interval
11