ESI ESRTP4 Інструкція з монтажу Посібник з монтажу - Сторінка 13
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Терморегулятор ESI ESRTP4. ESI ESRTP4 16 сторінок. Programmable room
thermostat
Також для ESI ESRTP4: Інструкція користувача (20 сторінок)
Друкувати сторінку
equal to the Due Date, the screen will display SER
constantly and the system ON time will be controlled by
the SER SET.
N.B. When the system is running to the ON condition, but is
limited by the SER SET (and therefore cannot be ON),
the screen will flash the ON symbol.
10. Press Next
press +/– to choose either 4 or 6 time temperature
events per day.
11. To exit the installer setting press the
Lockout Feature:
3.4
The RTP4 and RTP4RF comes with a lockout feature which
enables the installer to disable certain functions of the
thermostat to a complete lockdown depending on the mode
selected.
Setting the Installer lockout mode
3.5
1. Follow steps 1 to 4 above
2. Press the Next
settings.
3. Use the +/– buttons to choose between: -
Default Setting 1
This mode works as a standard Programmable Room
Thermostat.
Partial Lockout 2
This mode allows the installer to set the Maximum
temperature Setpoint (factory default 21°c), and allows
the end user to adjust all other settings apart from
maximum temperature set point.
to enter the PROGRAMMES setting,
button to enter the installer lock
Home button.
13