ClearWater OzoneMax OZ-SPA Посібник з монтажу та експлуатації - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Освітлювальне обладнання ClearWater OzoneMax OZ-SPA. ClearWater OzoneMax OZ-SPA 8 сторінок. Vacuum-ultraviolet pool ozone systems

Друкувати сторінку

Any electrical connections should be performed by a certified electrician in accordance with all

electrical codes. OZ-SPA systems are universal voltage, meaning the unit will work on 115 or

230VAC without any internal switching. When locating the power source, make sure that when the

pump and motor shuts off, the OZ-SPA will too. The ideal source is the timer box. If no timer box

exists, the unit can use the pump motor as its power source. In other words, the electrical connection

should be such that the OZ-SPA is supplied power only when the power is supplied to the pool

filter/circulation pump.

A permanent ground bonding connector is provided on this unit and should

be used to connect a minimum 12 AWG solid copper wire conductor to any

metal equipment, metal enclosures of electrical equipment, metal water pipe,

or conduit within five (5) feet of the unit.

Power Source/

Pump Timer

Pump

N = Nylon Hose Clamps

M = Metal Hose Clamps

Using the above drawing, install the venturi injector kit (OZ-VIK) as seen on page 6

F. Electrical

G. Installing the Venturi Injector

water flow

Filter

2" slip x ¾" fpt x 2" slip tee

water flow

Heater

Kynar check valve

¼" reinforced vinyl hose

Venturi Injector

¾" mpt to ¾" barbed adapter

¾" ID vinyl tubing

SPA

Continue on next page >>>