Artison Sketch LCR DualMono MK 2 Посібник з монтажу - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник з монтажу для Спікери Artison Sketch LCR DualMono MK 2. Artison Sketch LCR DualMono MK 2 16 сторінок.
Також для Artison Sketch LCR DualMono MK 2: Короткий довідник (4 сторінок), Короткий довідник (4 сторінок), Посібник з монтажу (4 сторінок)
Друкувати сторінку
INSTALLATION OPTIONS
The Artison LCRDM MK2 Speakers were designed to have multiple installation options
using the included and accessory components.
On-Wall
Attached to FPTV on a Table Stand or Wall Mount [Additional accessories
required: UMB & GLCRDM2 Grilles]
In-Wall [Additional accessory required: LCR DM IW KIT]
ON-WALL INSTALLATION OF THE LCR DM MK2
1.
Remove the LCR DM Bracket from the speakers by loosening the 2 thumbscrews in a
counter-clockwise direction.
2.
Carefully slip off the bracket. NOTE: DO NOT place the speaker face down as this
may permanently damage the drivers.
3.
The LCR DM Brackets have two slots cut through the rear of the part which will
function as a surface mount bracket. Refer to FIGURE 1.
4.
Make a hole directly behind the terminal posts in the center of the speaker bracket for
the speaker wire.
5.
Place each LCR DM MK2 on their corresponding sides of the television.
DualMono Center Channels should be located on the top half of the display. Refer to
FIGURE 2.
4
The