Artison Sketch LCR DualMono MK 2 Kurulum Kılavuzu - Sayfa 4
Konuşmacılar Artison Sketch LCR DualMono MK 2 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Artison Sketch LCR DualMono MK 2 16 sayfaları.
Ayrıca Artison Sketch LCR DualMono MK 2 için: Hızlı Referans Kılavuzu (4 sayfalar), Hızlı Referans Kılavuzu (4 sayfalar), Kurulum Kılavuzu (4 sayfalar)
Sayfayı Yazdır
INSTALLATION OPTIONS
The Artison LCRDM MK2 Speakers were designed to have multiple installation options
using the included and accessory components.
On-Wall
Attached to FPTV on a Table Stand or Wall Mount [Additional accessories
required: UMB & GLCRDM2 Grilles]
In-Wall [Additional accessory required: LCR DM IW KIT]
ON-WALL INSTALLATION OF THE LCR DM MK2
1.
Remove the LCR DM Bracket from the speakers by loosening the 2 thumbscrews in a
counter-clockwise direction.
2.
Carefully slip off the bracket. NOTE: DO NOT place the speaker face down as this
may permanently damage the drivers.
3.
The LCR DM Brackets have two slots cut through the rear of the part which will
function as a surface mount bracket. Refer to FIGURE 1.
4.
Make a hole directly behind the terminal posts in the center of the speaker bracket for
the speaker wire.
5.
Place each LCR DM MK2 on their corresponding sides of the television.
DualMono Center Channels should be located on the top half of the display. Refer to
FIGURE 2.
4
The