cuTex TBC-50H Як працювати - Сторінка 2
Переглянути онлайн або завантажити pdf Як працювати для Різак cuTex TBC-50H. cuTex TBC-50H 14 сторінок. Automatic ribbon tape & small webbing cutter
Друкувати сторінку
- 1. How to Operate TBC-50H
- 2. Key Functions
- 3. Specification
- 4. Caution for Use
- 5. Exchange of Knife
- 6. Mount of Roll
- 7. Exchange of Fuse
- 8. Part Drawing a of TBC-50H (Feeding Part)
- 9. Part List a of TBC-50H (Feeding Part)
- 10. Part Drawing B of TBC-50H (Cutting Part)
- 11. Part List B of TBC-50H (Cutting Part)
- 12. Part Drawing C of TBC-50H (Other Parts)
- 13. Part List C of TBC-50H (Other Parts)
- 14. Trouble-Shooting of TBC-50 Series
- 15. Check Code
- 16. Error Code
1. An example (Cutting length : 70mm, Cutting quantity : 120 pcs)
▷ Turn on the POWER SW.
▷ Set the temperature.(It is normally used at 250° ∼350° C. About 5 minutes after turn-on
& set it, it will be reached to set-temperature. (For more detail, refer to the appended
"How to use temperature Controller DX4")
※ Caution : When a work is over, set the temperature at zero and turn the cooling
fan 10 minutes or so and power off.
▷ Set cutting length. (Press the following buttons in order.)
☞
LENGTH
⇒
▷ Set cutting quantity.
☞
Q'TY
⇒
▷ Running of knife-front roller
Turn on MOTOR SW to prevent cutted materials from clinging to the knife blade.
E-mail :
How to operate TBC-50H
0
7
LENGTH
⇒
⇒
CLEAR
1
SPEED
EXTRA
⇒
⇒
2
SET
0
SE T
LENGTH
⇒
CLEAR
- 1 -
http://www.taewoocutex.com