cuTex TBC-50H Як працювати - Сторінка 3
Переглянути онлайн або завантажити pdf Як працювати для Різак cuTex TBC-50H. cuTex TBC-50H 14 сторінок. Automatic ribbon tape & small webbing cutter
Друкувати сторінку
- 1. How to Operate TBC-50H
- 2. Key Functions
- 3. Specification
- 4. Caution for Use
- 5. Exchange of Knife
- 6. Mount of Roll
- 7. Exchange of Fuse
- 8. Part Drawing a of TBC-50H (Feeding Part)
- 9. Part List a of TBC-50H (Feeding Part)
- 10. Part Drawing B of TBC-50H (Cutting Part)
- 11. Part List B of TBC-50H (Cutting Part)
- 12. Part Drawing C of TBC-50H (Other Parts)
- 13. Part List C of TBC-50H (Other Parts)
- 14. Trouble-Shooting of TBC-50 Series
- 15. Check Code
- 16. Error Code
▷ Press START button.
☞
START
2. Key functions
0
LENGTH
: Current length on display will be back to "0" at a stop.
CLEAR
RESET
: All of current length and current q'ty on display will be back to "0".
5
M/CUT
: Moving knife only.
① to cut the material for test.
② to take out the material jammed between knife blades.
③ for balancing of knife blades in exchange.
1
: Cutting additional one.
EXTRA
SHIFT
ESC
: Restoring to normal condition in ERROR(red LED)
and inputting parameter or program.
4
6
FEED
FEED
or for feeding it forwards or backwards.
SPEED
― Speed up (The current speed appears on the left-upside of LCD display with
2
"%". Normal speed : 50%, Maximum speed : 100%)
8
SPEED
― Speed up (The current speed appears on the left-upside of LCD display with
"%". Normal speed : 50%, Maximum speed : 0%)
* Speed up & down is possible in any time(operation or stop) and set-speed will
not be changed even though you press RESET button or power off & on.
←
: to correct rong data.
DEL
E-mail :
: to move the roller manually for mounting the material on the machine
- 2 -
http://www.taewoocutex.com