Aluprof ER-P Series Посібник з програмування - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник з програмування для Двигун Aluprof ER-P Series. Aluprof ER-P Series 8 сторінок.
Також для Aluprof ER-P Series: Посібник з програмування (9 сторінок)
Друкувати сторінку
12. REDUCING THE SENSITIVITY OF THE OVERLOAD SYSTEM.
Sensitivity range 1 (lowest) - 5 (highest). Default set to 3. Decreasing it changes by 1 level.
Press the „UP" and „DOWN" buttons
simultaneously
and hold for 5 seconds.
Press the „STOP" button
and hold for 2 seconds.
13. INCREASING THE SENSITIVITY OF THE OVERLOAD SYSTEM.
Sensitivity range 1 (lowest) - 5 (highest). Default set to 3. Increase Decreasing it changes by 1 level.
Press the „UP" and „DOWN"
buttons simultaneously
and hold for 5 seconds.
Press the „STOP" button
and hold for 2 seconds.
We reserve the right to any technical change.
Valid on 2022.01.27
PROGRAMMING MANUAL FOR AM45 MOTORS ER-P SERIES
The motor will make a short
move DOWN - UP.
The motor will make a short
move DOWN - UP.
The motor will make a short
move DOWN - UP.
The motor will make a short
move DOWN - UP.
Press the „STOP" and „DOWN"
buttons simultaneously.
The setting has been saved.
Press the „STOP" and „UP" buttons
simultaneously.
The setting has been saved.
The motor will make a short
move DOWN - UP.
The motor will make a short
move DOWN - UP.
7