Aluprof ER-P Series 프로그래밍 매뉴얼 - 페이지 7

{카테고리_이름} Aluprof ER-P Series에 대한 프로그래밍 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aluprof ER-P Series 8 페이지.
Aluprof ER-P Series에 대해서도 마찬가지입니다: 프로그래밍 매뉴얼 (9 페이지)

페이지 인쇄
Aluprof ER-P Series 프로그래밍 매뉴얼
12. REDUCING THE SENSITIVITY OF THE OVERLOAD SYSTEM.
Sensitivity range 1 (lowest) - 5 (highest). Default set to 3. Decreasing it changes by 1 level.
Press the „UP" and „DOWN" buttons
simultaneously
and hold for 5 seconds.
Press the „STOP" button
and hold for 2 seconds.
13. INCREASING THE SENSITIVITY OF THE OVERLOAD SYSTEM.
Sensitivity range 1 (lowest) - 5 (highest). Default set to 3. Increase Decreasing it changes by 1 level.
Press the „UP" and „DOWN"
buttons simultaneously
and hold for 5 seconds.
Press the „STOP" button
and hold for 2 seconds.
We reserve the right to any technical change.
Valid on 2022.01.27
PROGRAMMING MANUAL FOR AM45 MOTORS ER-P SERIES
The motor will make a short
move DOWN - UP.
The motor will make a short
move DOWN - UP.
The motor will make a short
move DOWN - UP.
The motor will make a short
move DOWN - UP.
Press the „STOP" and „DOWN"
buttons simultaneously.
The setting has been saved.
Press the „STOP" and „UP" buttons
simultaneously.
The setting has been saved.
The motor will make a short
move DOWN - UP.
The motor will make a short
move DOWN - UP.
7