Aluprof AC250-02 Посібник зі складання та програмування - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник зі складання та програмування для Перемикач Aluprof AC250-02. Aluprof AC250-02 6 сторінок. Under plaster switch with radio receiver
Також для Aluprof AC250-02: Посібник з програмування (7 сторінок)

Друкувати сторінку
PROGRAMMING MANUAL FOR AC250-02 UNDER PLASTER SWITCH WITH RADIO RECEIVER
13. PROGRAMMING THE DIRECTION OF MOVEMENT
I
Press and hold the "RIGHT"
button for 1 second.
The signal symbol will
flash.
II
Press and hold the "UP" and
"DOWN" buttons for
4 seconds.
14. ERASING ONE TRANSMITTER.
Press and hold the "RIGHT"
button for 1 second.
The signal symbol will
flash.
15. ERASING ALL OF THE TRANSMITTERS.
Press and hold the "RIGHT"
button for 6
seconds. The signal
symbol will flash.
6
Press the "DOWN"
button on the transmitter.
After 2 seconds,
"SET" will be displayed.
On the transmitter
press the „P2" button.
After 6 seconds, the
signal symbol will
flash quickly 3 times .
The signal symbol
will flash quickly 3 times.
After 4 seconds,
"UP" or "dn" will be displayed.
Release the buttons.
The signal symbol
will flash quickly 3 times.
The transmitters have been
deleted.
The setting has been saved.
The setting has been saved.
The transmitter has been
deleted.
We reserve the right to any technical change.
Valid on 2021.05.27