Aluprof DC1690 Посібник з експлуатації

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Перемикач Aluprof DC1690. Aluprof DC1690 2 сторінки. Plaster switch with radio receiver
Також для Aluprof DC1690: Посібник з програмування (4 сторінок)

Друкувати сторінку

OPERATING MANUAL FOR UNDER PLASTER SWITCH WITH RADIO RECEIVER DC1690

1. TECHNICAL SPECIFICATIONS

433 MHz

230V / 50Hz

- Power supply: ~230V/50Hz

- Applied for max 50 Nm tubular motor

- Frequency: 433.92 Mhz

- Can store 20 channels at most

- Radiated power: 10 miliwat (mW)

- Operating temperature: ~ -10°C ~ +55°C

- Average range:

200 meters (in open space)

35 meters (inside buildings)

- single channel control

- Dimensions: 80x80 mm

Company reserves the tolerance of catalog data due the different conditions

usage.

Works with standard version tubular motors and can match all DC remote

controllers

Installation of the switch should be carried out by authorized persons

(e.g. ECS authorisations to operate electrical devices up to 1 kV).

The switch is designed for use in dry rooms and should not be exposed to direct

weather conditions.

The switch should be powered by a separate circuit and protected by a quick

fuse for example: circuit breaker type B10.

2. ELECTRICAL CONNECTIONS BETWEEN MOTOR AND UNDER PLASTER SWICH

Power supply: 230V / 50 Hz

NOTE

In accordance with the provisions of the Directive of the European Parliament and of the Council 2012/19 / EU of 4 July 2012 on waste electrical

and electronic equipment (WEEE), it is prohibited to place of used equipment together with other wastes, marked with crossed out wheeled bin

symbol. The users are obliged to transfer their used equipment to a designated collection point for proper processing. The marking means, at the

same time, that the equipment was put on the market after 13 August 2005. These legal obligations have been introduced to reduce the amount

of waste generated from waste electrical and electronic equipment and to ensure an appropriate level of collection, recovery and recycling.

The equipment does not contain any dangerous components, which would have any particularly negative impact on the environment and human

health.

TOP

STOP

BASE

Wiring diagram

We reserve the right to any technical change. Valid on 2019.09.18