FLEETLOGIC TRACKnTAG TAG-HAWK Інструкція з монтажу Посібник з монтажу - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для GPS FLEETLOGIC TRACKnTAG TAG-HAWK. FLEETLOGIC TRACKnTAG TAG-HAWK 6 сторінок.

FLEETLOGIC TRACKnTAG TAG-HAWK Інструкція з монтажу Посібник з монтажу
Before mounting the tracker, connect the Jumper cable supplied so that terminals 7 & 8 are connected. This
switches the tracker on. Then simply install the terminal box cover on with the 4 M2 screw.
Terminal access explained:
1. (DO1)
Negative digital output. This activates a standard relay.
2. (DC Detect)
DC power trigger to wake unit manually
3. (Solar
-) GND from external Solar panel if installed
4. (VCC-)
GND from trailer
5. Not used
6. Not used
7 & 8. (Jumper )
This switches the tracker On/Off
9. (VCC+)
Constant power
10. (Solar +)
Power from external Solar panel if installed
11. (ANI)
Positive Analog input. This is used to measure the
voltage of a positive power source. By default this is already bridged
to terminal 8 inside the tracker.
12. (DI-1)
Positive digital input. Use this when you want to know
when a positive source is activated
The tracker is configured to automatically detect the extra connection
and transmit any data to the tracking server.
Please contact our support department for further explanation if
required.