Clippasafe 130 Інструкція з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Внутрішнє оздоблення приміщень Clippasafe 130. Clippasafe 130 5 сторінок. Extendable swing shut gate
Друкувати сторінкуFitting a 7cm Extension
1. Remove both top and bottom spindles (1) and their casings (6) from the latch side
of the gate.
2. Turn both spindle casings (6) upside down so that the lugs point downwards
and re-insert them into the frame, both top and bottom. They should now extend
slightly from the frame.
3. Insert the 7cm extension (5) into
the spindle casings.
4. Finally insert the spindles (1) with
nuts (2) attached, into the extension.
5.
If a second 7cm extension is required repeat on the other side of the gate.
\e
1
<
i
t
i
»
i
Fitting an 18cm Extension - available separately
1. Remove both top and bottom spindles (1) and their casings (6) from the
latch side of the gate.
2.
Place the 18cm extension directly into the frame making sure that the notches
on the bars are facing upwards. Then insert the spindles (1) with nuts (2) attached
into the extension, top and bottom.
3.
If a second 18cm extension is required repeat on the other side of the gate.
WIDTH
81 - 88cm
88 - 95cm
95 - 99cm
99 - 106cm
106 -113cm
113 -117cm
117- 124cm
124 -132cm
EXTENSIONS REQUIRED
7cm
1
2
1
1
18cm
1
1
2
1
7+18cm
1
1
2