Clippasafe 130 Інструкція з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Внутрішнє оздоблення приміщень Clippasafe 130. Clippasafe 130 5 сторінок. Extendable swing shut gate
Друкувати сторінкуFitting a combined 7cm & 18cm Extension
1. Fit the 18cm extension first by following instruction 1 and 2 of the 18cm Extension
fitting guide (G), but do not refit the spindles.
2.
Insert the spindle casings into the 7cm extension. Ensure that the notch
on the top casing is facing downwards and the notch on the bottom casing is facing
upwards.
V
/*
3. Insert the 7cm extension into the 18cm extension. Finally insert the spindles (1)
with nuts (2) attached into the extension, top and bottom.
Maintenance
Check the gate periodically to ensure that the wall surface,
wall cups, spindles and locking devices are all functioning
correctly. Additional and replacement parts can be
obtained by contacting the Clippasafe Customer Services
Department via the Careline or e-mail address below.
Clean the gate using warm water and a mild detergent.
No part of the gate requires lubrication.
Never use solvents, chemicals, scouring powders or sharp
tools to clean the gate.
Clippasafe Ltd
Lanthwaite Road, Clifton,
Nottingham NC11 8LD, England
Tel: 0115921 1899
Fax: 0115 984 5554
E-mail: [email protected]
www.clippasafe.co.uk
Model No.130 - Metal Gate
Model No. 132 - Wood Gate
©Clippasafe Ltd 2011 -130+T 32/Feb2011
. C A R E L I N E
Clipppsafe
0115921 1899